Dipolo Dinamico 20/6mt 3KW

SteppIR Yagi 2 elementi dinamica 20/6mt 3KW

Antenna YAGI 2 elementi 40/6mt dinamica 3KW

Antenna YAGI 3 elementi dinamica 20/6mt 3KW

Antenna YAGI 3 elementi dinamica 20/6mt e 30/40mt 3KW

Antenna YAGI 4 elementi 20/6mt dinamica 3KW

Antenna YAGI 4 elementi 20/6mt e 30/40mt dinamica 3KW

Antenna YAGI 3 elementi 20/6mt dinamica 3KW

With the DB11, you don’t have to give up performance to fit the antenna into a small space!

The DB11 is the smallest of our Yagi antennas that uses loop technology.  This is a distinctive advantage, allowing for a 40% smaller size platform with excellent performance.  The DB11 uses an integral coax switch to select which one of the three elements are driven to give equal performance in forward and reverse directions. The control of the Antenna and Coax switch is integrated into the SDA100 controller for effortless tuning.  The DB11 is our only antenna without the optional 6m passive element kit – the spacing of the 3 elements turns out to be ideal for 6m as well.

With two active elements on 20m and three active elements above 20m, an average of 7 DB of gain, and 20 DB front/rear ratio is obtained on each band.

Antenna YAGI 3 elementi 40/6mt dinamica 3KW

DB18 Yagi antenna uses loop elements for 30 and 40M performance.  The DB18 and DB18E are the most popular antennas in the DB line, due to their performance vs. size profile.  The loop elements used for 40 and 30m are 40% shorter than a full size element would be, with very little sacrifice in performance (-0.4dB).

The DB18 uses an integral coax switch to select which one of the three elements are driven to give equal performance in forward and reverse directions. The control of the Antenna and Coax switch is integrated into the SDA100 controller (standard on DB18) for effortless tuning.

The only difference between the DB18 and the DB18E is on 30m – the DB18 has two elements on 30m, making it a wide spaced high gain dipole with very little front to rear.  The DB18E has 3 elements on 30m, making it an optimally spaced Yagi with solid gain and excellent front-to-rear ratios.

Antenna YAGI 3 elementi 40/6mt dinamica 3KW

The DB18E Yagi antenna utilizes folded dipole technology for 30 and 40M performance.  There are 3 looped elements on the antenna.  On 40m two loop elements are active and on 30m-6m all three elements are active.   The DB18E uses an integral coax switch to select which one of the three elements are driven to give equal performance in forward and reverse directions. The control of the antenna and coax switch is integrated into the SDA100 controller for effortless tuning.

The singular difference between the DB18E and DB18 are the active elements on 30m – on the DB18E there are 3 active elements on 30m and on the DB18 there are  2 active elements on 30m.

Antenna YAGI 4 elementi 40/6mt dinamica 3KW

The DB36 is part of the DB series Yagi antennas that use loop elements for 30 and 40M performance. The DB36 packs MonstIR performance into an antenna that turns in nearly half the radius, and is almost half the weight.   The DB36 is unique among the DB series antennas in that it has a single feed line, and no relays inside the EHU’s.  The DB36 has a 49 ft looped driven element.  This patented design allows us to make the end loop elements only 39 feet long, yet the performance is as if all 3 of the loop elements are 49 feet long.  The folded dipole loop technology lets the footprint be 40% less than that of the MonstIR Yagi, losing only 0.4dB in gain performance.

The DB36 has a optional 80M dipole that works with the SDA100 controller for effortless tuning 6M through the entire 80M band.  The dipole runs parallel to the boom and uses the end elements as capacity hats, creating zero interaction with the rest of the antenna.

Antenna YAGI 4 elementi 40/6mt dinamica 3KW con SDA-100 e ALP controller

Antenna YAGI 5 elementi 40/6mt dinamica 3KW

The DB42 Monstir Pro is currently the largest of the Dream Beam series of  Yagi antennas, with 5 elements on 20m-6m and 3 elements on 40/30. For those who aspire to the pinnacle of performance, the DB42 provides coverage from 80m through 6m (with optional 80m dipole kit). The DB42 has a 49 ft looped driven element.  This patented design allows us to make the end loop elements only 39 feet long, yet the performance is as if all 3 of the loop elements are 49 feet long.  The folded dipole loop technology lets the footprint be 40% less than that of a full size yagi,  losing only 0.4dB in gain performance.

The DB42 has a optional 80M dipole that works with the SDA100 controller for effortless tuning throughout the entire 80M band.  The dipole runs parallel to the boom and uses the end elements as capacity hats, creating zero interaction with the rest of the antenna.

The 6m passive element option for the DB42 adds 3x fixed elements to the antenna, for a total of 8 elements on 6m.  With no interaction or wind load added to the antenna, this option creates a 6m Yagi with 14.0 dBi of gain and 25 dB of front to rear!

Antenna YAGI 5 elementi 40/6mt dinamica 3KW con SDA-100 ALP e OptimizIR controller